Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Joseph Camilleri

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] This next step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting.
-[* yellow] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling on them.
+[* black] This step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting.
+[* yellow] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.