5 LED 6 Mode Rear Bike Light LED Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Alex Sireci — 19 Kas 2015

Düzenleme onaylandı tarafından Alex Sireci

	[title] Remove LEDs
	[* black] Warm up the soldering iron
	[* black] Tin the tip of the soldering iron
	[* black] Apply a small amount of solder to the tip
	[* black] Wipe on a damp sponge
	[* black] Touch the tip of the soldering iron to the led solder to liquify it
	[* black] Apply solder wick to absorb solder
-	[* icon_note] A desoldering pump ~~was used~~ instead ~~in this guide,~~ ~~but a~~ wick would work better
+	[* icon_note] This guide uses a desoldering pump instead of desoldering wick. The wick would work better.