3. Adımdaki Değişiklikler
Düzenleyen: Alex Sireci —
Düzenleme onaylandı tarafından Alex Sireci
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Place the new LED through the holes where the old one was |
|---|---|
| + | [* black] If it does not stay, you can tape it in place on the opposite side of the board |
| + | [* black] Ensure the LED is on the same side of the board as the one you removed was |
| + | [* black] Warm up the trace on the circuit board and the LED lead with the soldering iron |
| + | [* black] Apply solder to the lead until the hole is filled with solder |
Resim 1
Önceki resim yok
Eklendi