Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Alex Sireci

Düzenleme onaylandı tarafından Alex Sireci


Adım Satırları

+[title] Insert New LED
[* black] Place the new LED through the holes where the old one was
[* black] If it does not stay, you can tape it in place on the opposite side of the board
[* black] Ensure the LED is on the same side of the board as the one you removed was
[* black] Warm up the trace on the circuit board and the LED lead with the soldering iron
+ [* icon_reminder] Wipe your soldering iron on the damp sponge every time you pick it up
[* black] Apply solder to the lead until the hole is filled with solder