Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

7. Adımdaki Değişiklikler

Düzenleyen: Ryan Riales

Düzenleme onaylandı tarafından Ryan Riales

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] If the top of the capacitor housing did not come off, you can slide your finger nail underneath the edges and it should pop off.
[*
black] Use a spudger, or other thin object, to remove the capacitor from the housing. (Image 2)
[* black] If the top of the capacitor housing did not come off, you can slide your finger nail underneath the edges and it should pop off.
[*
black] Use a spudger, or other thin object, to remove the capacitor from the housing. (Image 2)
[* black] To remove the red and yellow wires connected to the capacitor, use a soldering iron to heat up the solder and a vacuum to suck up the solder. Any other methods you know of will also work.
[* black] Take the capacitor to you local electronics store or order another capacitor online by reading the capacity off of the side of the capacitor. It should be in microFarads, which is a curvy u and an F, uFmicroFarads (µF).
[* black] Take the capacitor to you local electronics store or order another capacitor online by reading the capacity off of the side of the capacitor. It should be in microFarads, which is a curvy u and an F, uFmicroFarads (µF).
[* black] Once you have a new capacitor, solder on the red and yellow wires to the same place as the old capacitor.