Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi

Düzenleme onaylandı tarafından Kristen Gismondi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the 4 screws holding the bezel to the back display hosing.
-[* orange] Turn the display over, face down with the Apple logo facing towards you.
-[* yellow] Starting at the bottom of the display housing, using a flat-blade screw-driver, carefully pry the plastics apart at the 6 inner latch locations.
+[* red] Remove the four screws holding the bezel to the back display housing.
+[* orange] Turn the display face down with the Apple logo facing towards you.
+[* black] Starting at the bottom of the display housing, carefully pry the plastics apart at the six inner latch locations using a spudger.