Eşyalarını Tamir Et Topluluk Mağaza

5. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen —

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Removing the print head
[* black] Remove the springs that maintain the print head.
-[* black] Remove the print head by pulling on the ribbons.{--What does this mean??}
-[* black] In case you want to replace the print head, the spare part reference is: CN688A
-[* black] When inserting the print head after cleaning or replacing, be careful to make sure the horizontal plastic ribbon is between the plastic guides as shown on the last picture
+[* black] Remove the print head by pulling on the ribbons.
+[* icon_note] In case you want to replace the print head, the spare part reference is: CN688A
+[* red] When inserting the print head after cleaning or replacing, make sure the horizontal plastic ribbon is between the plastic guides, as shown in the last picture.