6. Adımdaki Değişiklikler
Düzenleyen: Chris Ritson —
Düzenleme onaylandı tarafından shingle
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Cleaning the print head park slot | |
| [* black] The printer has an automatic feature to clean the print head. Usually, there is a lot of ink (Probably melt with dust) in the area where the print head is cleaned | |
| - | [* black] Remove the 5 torx |
| + | [* black] Remove 4 of the 5 torx screws as shown in the picture. As given in a user comment, the top right one serves to join the two pieces of this part. |
| [* black] Assuming the print head is now removed (Not shown on the picture), now gently tip the plastic plate and remove it | |
| [* black] If you didn't put gloves yet, it is time to do it ! | |
| [* black] Now, push the carriage that holds the print head cleaning system (Red arrows) | |
| [* black] The carriage that holds the print head cleaning system is now clean (Last picture) |