2. Adımdaki Değişiklikler
Düzenleyen: Andrew Optimus Goldheart —
Düzenleme onaylandı tarafından Andrew Optimus Goldheart
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the following two screws: | |
| [* red] One 3.3 mm Phillips screw | |
| [* orange] One 2.1 mm Phillips screw | |
| [* black] Lift the metal retainer clip straight up from its recess in the rear panel. | |
| - | [* icon_caution] Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear camera. |
| + | [* icon_caution] Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear facing camera. |