5. Adımdaki Değişiklikler
Düzenleyen: iRobot —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Turn the computer over and open it up. |
|---|---|
| + | [* black] Remove the following 13 screws: |
| + | [* red] Six 2.5 mm Phillips on either side of the keyboard area. |
| + | [* orange] Five 4.5 mm Phillips on the left half of the keyboard area. |
| + | [* yellow] One 7 mm hex in the upper left corner of the upper case (a T6 Torx driver will do the job nicely). |
| + | [* green] One 15 mm Phillips in the upper middle of the keyboard area. |
| + | [* blue] One 16.5 mm hex in the upper right of the upper case (again, a T6 Torx driver will work well). |
Resim 1
Önceki resim yok
Eklendi