Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Spencer Craigie —

Düzenleme onaylandı tarafından Spencer Craigie

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Peel the black tape off of the back surface of the LCD
-[* red] Remove the four 3 mm screws on the LCD bracket.
-[* orange] Remove the two 2 mm screws from the top of the bracket.
-[* black] Lastly, using a spudger, pop the LCD out of the camera back plate.
-[* icon_note] When the bracket comes off, be aware that the buttons from the top section will fall out of place if the plate is inverted.
+[* black] Peel the black tape off the back of the LCD.
+[* red] Remove the four 3mm screws on the LCD bracket.
+[* orange] Remove the two 2mm screws from the top of the bracket.
+[* black] Use a spudger to pop the LCD screen out of the camera’s backplate.
+[* icon_note] When the bracket comes off, the buttons from the top section may fall out of place. If this happens then put them back in the position they were in.