3. Adımdaki Değişiklikler
Düzenleyen: Evan Noronha —
Düzenleme onaylandı tarafından Evan Noronha
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. | |
| + | [* icon_note] Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices and is held down with adhesive. |
| [* icon_caution] Pulling too hard may damage the display assembly. Apply just enough pressure to create a small gap between the display assembly and the rear case. |