6. Adımdaki Değişiklikler
Düzenleyen: Dillon Sanders —
Düzenleme onaylandı tarafından Dillon Sanders
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Place your thumb and forefinger on the sides of the white connector, connecting the daughter board to the main circuit board. Pull upwards while wiggling the connector from side to side. With little force, the connector should detach. |
|---|---|
| - | [* icon_caution] Do not pull on the wires. You could pull them out of the connector and then need to replace those. |
| + | [* black] Locate the white connector attached to the faceplate by black wires. |
| + | [* red] Place your forefinger and thumb on the sides of the connector. With little force, you should be able to pull the connector out. |
| + | [* icon_caution] Do not pull on the wire. This could pull them out of of the connector. |