Konica Minolta Dimage Z6 LCD Screen Replacement 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: Noah Mastruserio — 20 Nis 2016

Düzenleme onaylandı tarafından Noah Mastruserio

-	[* red] Carefully use ~~a wedge~~ to pop the LCD screen out of the bracket.
-	[* orange] The LCD screen should still be attached by orange ribbon.
-	[* yellow] Use tweezers to carefully pull the ~~orange ribbon~~ from the logic board, not from the LCD screen.
+	[* red] Carefully use the spudger to pop the LCD screen out of the bracket.
+	[* orange] The LCD screen should still be attached by orange ribbon cable.
+	[* yellow] Use tweezers to carefully pull the ribbon cable from the logic board, not from the LCD screen.
	[* green] Peel back yellow tape on LCD screen to reveal where the two wires are attached. Use tweezers to detach the orange and white wires from the LCD screen.