3. Adımdaki Değişiklikler
Düzenleyen: Jamie Jubeck —
Düzenleme onaylandı tarafından Jamie Jubeck
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Carefully use the spudger to pop the LCD screen out of the bracket. | |
| - | [* orange] The LCD screen should still be attached by orange ribbon cable. |
| + | [* orange] The LCD screen should still be attached by orange ribbon cable and two wires, one orange and one white. |
| [* yellow] Use tweezers to carefully pull the ribbon cable from the logic board, not from the LCD screen. | |
| [* green] Peel back yellow tape on LCD screen to reveal where the two wires are attached. Use tweezers to detach the orange and white wires from the LCD screen. |