Konica Minolta Dimage Z6 LCD Screen Replacement 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: Danielle Davis — 23 Eki 2024

Düzenleme onaylandı tarafından Danielle Davis

	[* red] Carefully use the spudger to pop the LCD screen out of the bracket.
	[* orange] The LCD screen should still be attached by orange ribbon cable and two wires, one orange and one white.
-	[* ~~yellow~~] Use [product\|IF145-020\|tweezers] to carefully pull the ribbon cable from the logic board, not from the LCD screen.
+	[* black] Use [product\|IF145-020\|tweezers] to carefully pull the ribbon cable from the logic board, not from the LCD screen.
	[* green] Peel back yellow tape on LCD screen to reveal where the two wires are attached. Use tweezers to detach the orange and white wires from the LCD screen.