Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

3. Adımdaki Değişiklikler

Düzenleyen: Alex Lin

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* icon_note] Note: It is recommended that step 3 and step 4 be completed simultaneously. The tabs are identical just on opposite sides.
[* black] Viewing from the front of the printer, there is a tab in the lower left corner.
[* blue] Viewing the tab hole from the bottom of the printer.
[* yellow] You will need to insert one ofInsert the recommended toolsmini screwdriver into the marked hole toand pry out the tab. Do this until you completely release the tab.
[* yellow] You will need to insert one ofInsert the recommended toolsmini screwdriver into the marked hole toand pry out the tab. Do this until you completely release the tab.
[* black] Push in towards the blue sticker of the printer while pulling up on the case at the same time. Use one of the tools to keep the tab pried open.
[* icon_caution] This tab is the easiest to break so be very careful.