Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Marisa Inahara —

Düzenleme onaylandı tarafından Marisa Inahara

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] 1. Disconnect all the wires from the circuit board.
-[* black] 2. Using the j000 screwdriver, remove all four screws from the circuit board and place them safely on the table (separate from the case ones)
-[* black] 3. Gently pry circuit board from the bottom shell and place it gently on the work surface
+[* black] Disconnect all the wires from the circuit board.
+[* black] Using the j000 screwdriver, remove all four screws from the circuit board and place them safely on the table (separate from the case ones)
+[* black] Gently pry circuit board from the bottom shell and place it gently on the work surface