Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Miroslav Djuric

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* icon_note] If your replacement headphone jack includes the white plastic hold switch, simply reinstall the headphone jack. If your replacement part does not include the plastic hold switch, follow the next steps to transfer the plastic hold switch to your new headphone jack.
[* icon_note] If you're just trying to remove the rear panel, you can skip Steps 30 and 31.
[* red] Remove the single Phillips screw nearest to the hold switch.
[* black] Lift the plastic portion of the Hold switch away from the orange ribbon cable.
[* icon_reminder] Ensure that the black notch lines up with the gray slider during reassembly of the switch (see picture 2).

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi