Motor Replacement 4 No'lu Adım Geçmişi

4. Adımdaki Değişiklikler

Düzenleyen: Dalton Johnson — 13 Nis 2016

Düzenleme onaylandı tarafından Dalton Johnson

-	[* ~~black~~] Using a phillips head screwdriver, unscrew the four black (9mm) screws located on the plastic attachment at the bottom of the motor.
+	[* yellow] Using a phillips head screwdriver, unscrew the four black (9mm) screws located on the plastic attachment at the bottom of the motor.
	[* black] Carefully remove the motor and the plastic attachment from the rest of the drill hardware.
	[* icon_caution] Be sure to handle the chuck and remaining drill hardware carefully as gears may fall out of place. Do not turn upside down.