Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Shaelyn Thomas

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Unscrew the 3.35mm phillips head screw from the left side of the green circuit board using a #00 phillips head screwdriver.
+[* red] Unscrew 2 3.35mm phillips head screw from the face of the green circuit board using a #00 phillips head screwdriver.
[* icon_caution] Caution: Do not tear the ribbon connecting the circuit board to the body of the camera.
-[* orange] Use an iPod opening tool to loosen the black ribbon clamp.
+[* orange] Release the black ribbon clamp using an iPod opening tool to lift the clamp.
[* blue] Remove the ribbon connecting the circuit board from the body of the camera using tweezers.
[* black] *ADD 3 new pictures*