10. Adımdaki Değişiklikler
Adım Satırları
| [title] Prepare cables on new fan | |
| - | [* |
| + | [* icon_note] The new fan in this guide is an Antec TriCool 92mm computer case Fan, with 3-speed switch. If you get another 92mm fan, just skip the instructions for the 3-way switch placement. |
| [* black] On this fan, I first attached the "dongle" that adapts the 3-pin connector on the fan to the 4-pin old-school molex connector. This is to help figure out which conductors are positive, negative, and speed sensor, because the new fans did not have color-coded conductors. (The speed sensor will not get used here) | |
| [* black] Mark on you new fan which conductor is black (negative), and which is positive (red). | |
| [* black] Once you have marked the cable, cut the 3-pin connector off. |