Eşyalarını Tamir Et Topluluk Mağaza

9. Adımdaki Değişiklikler

Düzenleyen: Netmammal —

Düzenleme onaylandı tarafından Netmammal

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Cut old fans loose
-[* black] You have several choices as to how much of the original wiring to re-use. See my Teardown for more detail on the fan wiring. Unfortunately this device is designed to make it almost impossible to replace the fans neatly.
-[* black] In every method, you will be cutting the cables leading to the fans.
+[* icon_note] You have several choices as to how much of the original wiring to re-use. See my Teardown for more detail on the fan wiring. Unfortunately this device is designed to make it almost impossible to replace the fans neatly.
+[* icon_note] In every method, you will be cutting the cables leading to the fans.
[* black] You can either re-use the existing female 2-pin connector, or buy a new one. These instructions are written assuming you bought a new connector, and are wiring the fans with a new harness.
-[* black] This method has the advantage that you can test the fans/harness assembly before you re-assemble the whole kazoo, fill it up with water, and then find it does not work. (...And rinse, and repeat in your author's case. :-()
+[* black] This method has the advantage that you can test the fans/harness assembly before you re-assemble the whole kazoo, fill it up with water, and then find it does not work. (...And rinse, and repeat, and rinse and repeat, in your author's case. )