1. Adımdaki Değişiklikler
Adım Satırları
| + | [* black] Begin by using a heat gun or iOpener (will take a little longer) to melt the adhesive all around the outer edge of the screen. |
|---|---|
| + | [* black] Insert the guitar picks just under the screen and black edging. Be sure to place them evenly on each side. |
| + | [* black] Using the gap created from the guitar picks, slowly pry the screen from the body of the Surface 2 with the help of any plastic prying tool. Pry as uniformly as possible. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi