Microsoft Surface 2 Screen Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Gregory Miller — 13 Mar 2016

Düzenleme onaylandı tarafından Gregory Miller

-	[* black] Begin by using a heat gun or iOpener (will take ~~a little~~ longer) to melt the adhesive all around the outer edge of the screen.
-	[* black] Insert the ~~guitar~~ picks just under the screen and black edging. Be sure to place them evenly on each side.
-	[* black] Using the gap created from the guitar picks, slowly pry the screen from the body of the Surface 2 with the help of any plastic prying tool. Pry as uniformly as possible.
+	[* black] Begin by using a heat gun or the iOpener (this will take longer) to melt the adhesive all around the outer edge of the screen. Avoid holding the heat gun too close to the Microsoft Surface 2 so as to not cause any unwanted warping. Also try to avoid touching the metal end of the gun because it will be very hot and can burn you.
+	[* black] Insert the opening picks just under the screen and black edging. Be sure to place them evenly on each side.
+	[* black] Using the gap created from the guitar picks, slowly pry the screen from the body of the Microsoft Surface 2 with the help of any plastic prying tool. Pry as uniformly as possible.