Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: erpel

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove following two screws:
[* red] One 8.6 mm Phillips screw
[* orange] One 3.9 mm Phillips screw
[* black] Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.
+[* black] Note that there is a small nose on the short flat side of the metal assembly, that has to go under the upper case frame on the outer rim of the case during reassembly.