Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: johann beda

Düzenlenme reddedildi tarafından Andrew Optimus Goldheart

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[title] Disconnect the optical drive thermal sensor connector
[* red] Pull the optical drive thermal sensor connector straight up from its socket on the logic board. Pull parallel to the board.
[* icon_note] If you are removing the optical drive just to get access to the fan, disconnecting the optical drive thermal sensor connector is not neccessary, as there is enough slack to remove the fan with the optical drive cables still connected.