Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Lift the inner edge of the optical drive and maneuver its connector past the frame attached to the logic board.
-[* black] Carefully pull the optical drive off its mounting pins on the edge of the outer case to gain clearance for disconnecting the optical drive cable.
-[* black] De-route the optical drive thermal sensor connector from its recess behind the AirPort card.
+[* black] Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.
+[* black] Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.
+[* black] Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink.