Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Ron Davis

Düzenleme onaylandı tarafından Ron Davis

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Carefully and slowly pull one side from the other.
-[* icon_caution] Make sure the opposite sides are not separated completely because there are connecting wires.
-[* black] Rotate the opened device upside down to access the buttons' location in the second picture.
+[* black] Carefully and slowly pull the lower case away from the rest of the device.
+[* icon_caution] Do not completely separate the lower case. There are several wires connecting the two halves of the device.
+[* black] Flip the device over to access the button assembly.
+[* black] Slowly remove the button contact board from the assembly.

Resim 3

Önceki resim yok

Eklendi