Bu Adımdaki Değişiklikler
Düzenleyen: McGregor Coyne —
Düzenleme onaylandı tarafından McGregor Coyne
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the 7 screws on the outside of the camera | |
| - | [* red] Two 5 mm |
| - | [* orange] Four 3mm |
| + | [* red] Two 5 mm PH000 screws on the right side of the camera body |
| + | [* orange] Four 3mm PH000 screws on the bottom and the left side of the camera body. |
| [* black] Use the plastic spundger to push the back casing out. Start from the right side and work your way clockwise around the case. | |
| [* icon_note] The HDMI / AV tab might fall out. this is supposed to happen as it is not screwed into place in the back casing. |