3. Adımdaki Değişiklikler
Düzenleyen: Kristen Gismondi —
Düzenleme onaylandı tarafından Kristen Gismondi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] On the bottom of the OnHub is two screws holding the casing to the base. | |
| [* black] To access these screws, you must remove the rubber pad that is glued to the base. | |
| [* black] To remove the pad, slide a metal spudger under the edge of the pad. Pry the pad away from the base, removing the glue. | |
| [* black] Once the pad is pulled up enough to grab, peel it the rest of the way exposing the screws. | |
| - | [* icon_caution] The rubber pad is thin and fragile |
| + | [* icon_caution] The rubber pad is thin and fragile; be careful not to tear when removing. |