3. Adımdaki Değişiklikler
Düzenleyen: Natali Monge —
Düzenleme onaylandı tarafından Natali Monge
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Things are about to heat up. For this step you will need to utilize a heat gun. Make sure to get heat-resistant gloves (oven mitts not recommended) so you don't burn yourself |
| [* black] Make sure to place the phone on a surface that will not catch fire or melt. |
| [* black] With your heat gun and gloves on, slowly and evenly heat the edges of the back glass plate. |
| [* black] As heat is applied, do not linger too long on one spot. The heat gun can damage device if left on one section for a long period of time. Apply the heat evenly, testing if the adhesive is soft enough to use the jimmy to separate the back glass panel from the device. |
| [* black] As you separate the panel from the device, use |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi