Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Natali Monge

Düzenleme onaylandı tarafından Natali Monge

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Things are about to heat up. For this step you will need to utilize a heat gun. Make sure to get heat-resistant gloves (oven mitts not recommended) so you don't burn yourself
[* black] Make sure to place the phone on a surface that will not catch fire or melt.
[* black] With your heat gun and gloves on, slowly and evenly heat the edges of the back glass plate.
[* black] As heat is applied, do not linger too long on one spot. The heat gun can damage device if left on one section for a long period of time. Apply the heat evenly, testing if the adhesive is soft enough to use the jimmy to separate the back glass panel from the device.
[* black] As you separate the panel from the device, use the picks to hold the panel apart from the device.
[* black] As you separate the panel from the device, use the picks to hold the panel apart from the device.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm

Resim 3

Eski Sürüm

Yeni Sürüm