Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Natali Monge

Düzenleme onaylandı tarafından Natali Monge

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Things are about to heat up. For this step you will need to utilize a heat gun.
[* icon_caution] '''Warning: Make sure to get heat-resistant gloves (oven mitts not recommended) so you don't burn yourself. Take caution to place the phone on a surface that will not catch fire or melt.'''
[* black] With your heat gun and gloves on, slowly and evenly heat the edges of the back glass plate.
[* icon_note] As heat is applied, '''do not linger too long on one spot'''. The heat gun can damage device if left on one section for a long period of time.
[* black] Apply the heat evenly, testing if the adhesive is soft enough to use the jimmy to separate the back glass panel from the device.
[* black] As you separatedetach the panel from the device, use the picks to hold the panel apart from the device.
[* black] As you separatedetach the panel from the device, use the picks to hold the panel apart from the device.