Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Ron Davis

Düzenleme onaylandı tarafından Ron Davis

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Things are about to heat up. For this step you will need to utilize a heat gun.
[*
icon_caution] '''Warning: Make sure to getPut on heat-resistant gloves (oven mitts not recommended) so you don't burn yourself. Take caution toand place the phone on a surface that will not catch fire or melt.'''melt.
[* black] With yourUsing a heat gun and gloves ongun, slowly and evenly heat the edges of the back glass platerear panel.
[* icon_caution] As heat is applied, '''do'''Do not linger too long on one spot'''. The heat gun can damage the device if left on one section for a long period of time.
[* black] ApplyWhile heating the heat evenly, testingrear panel, use a Jimmy to test if the adhesive is soft enough to useallow the jimmypanel to separate the back glass panel from the device.
[* black] As youCarefully detach the panel from the device, use therear panel, using opening picks to hold the panel apart from the device. The suction cup is attached after the jimmy has separated
[* black] Once
most of the panel's edges are separated from the devicedevice, attach a suction cup to the panel.
[* black] Things are about to heat up. For this step you will need to utilize a heat gun.
[*
icon_caution] '''Warning: Make sure to getPut on heat-resistant gloves (oven mitts not recommended) so you don't burn yourself. Take caution toand place the phone on a surface that will not catch fire or melt.'''melt.
[* black] With yourUsing a heat gun and gloves ongun, slowly and evenly heat the edges of the back glass platerear panel.
[* icon_caution] As heat is applied, '''do'''Do not linger too long on one spot'''. The heat gun can damage the device if left on one section for a long period of time.
[* black] ApplyWhile heating the heat evenly, testingrear panel, use a Jimmy to test if the adhesive is soft enough to useallow the jimmypanel to separate the back glass panel from the device.
[* black] As youCarefully detach the panel from the device, use therear panel, using opening picks to hold the panel apart from the device. The suction cup is attached after the jimmy has separated
[* black] Once
most of the panel's edges are separated from the devicedevice, attach a suction cup to the panel.