Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Viktoriya Shapaval

Düzenleme onaylandı tarafından Viktoriya Shapaval

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] Put on heat-resistant gloves and place the phone on a surface that will not catch fire or melt.
[* black] Using a heat gun, slowlyapply slow and evenlyeven heat to the edges of the rearback panel.
[* icon_caution] '''Do not linger too longDO NOT stay on one spot'''. Thespot for too long, the heat gun can damage the devicephone if left on one sectionthe heat is applied to the same area for a long period of time.
[* black] While heating the rearback panel, use a Jimmy to test if the adhesive is soft enough to allow the panel to separate from the device.
[* black] Carefully detach the rearback panel, using opening picks to hold the panel apart from the device.
[* black] Once most of the edges are separated from the device, attach a suction cup to the back panel.
[* black] Using a heat gun, slowlyapply slow and evenlyeven heat to the edges of the rearback panel.
[* icon_caution] '''Do not linger too longDO NOT stay on one spot'''. Thespot for too long, the heat gun can damage the devicephone if left on one sectionthe heat is applied to the same area for a long period of time.
[* black] While heating the rearback panel, use a Jimmy to test if the adhesive is soft enough to allow the panel to separate from the device.
[* black] Carefully detach the rearback panel, using opening picks to hold the panel apart from the device.
[* black] Once most of the edges are separated from the device, attach a suction cup to the back panel.