3. Adımdaki Değişiklikler
Adım Satırları
| - | [* black] Use the plastic spudger to pry the retaining chip off. The retaining chip may be glued to the motherboard. |
|---|---|
| - | [* black] Use the plastic spudger to flip up the small, zero insertion force, retaining flap. |
| + | [* black] Use a spudger to pry up the retaining plate at the end of the ribbon cable. |
| + | [* icon_note] The retaining chip may be glued to the motherboard. |
| + | [* black] Use the spudger to flip up the small retaining flap on the zero insertion force connector. |
| [* icon_caution] Make sure you are prying up on the retaining flap, not the connector itself. | |
| [* black] Remove the ribbon cable from its port. | |
| [* icon_note] No force is needed to plug in or remove the ribbon cable. |