6. Adımdaki Değişiklikler
Düzenleyen: Andrew Bookholt —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Insert a mm Phillips screw into each of the outer holes drilled into the trackpad (two screws total). |
|---|---|
| + | [* red] Insert a 1.2 mm Phillips screw into each of the outer holes drilled into the trackpad (two screws total). |
| [* icon_caution] You'll install the rest in a bit. | |
| [* icon_note] When you tighten the two screws, make them tight and then back them out about a quarter turn to aid in aligning your trackpad during the next few steps. |