Microsoft Surface 2 Front Facing and Rear Facing Camera Replacement 2 No'lu Adım Geçmişi

2. Adımdaki Değişiklikler

Düzenleyen: Ron Davis — 19 May 2016

Düzenleme onaylandı tarafından Ron Davis

	[* black] Use a spudger to pry up the retaining clip covering the camera ribbon cables.
	[* icon_note] The retaining clip may be glued to the motherboard.
-	[* black] Use the ~~plastic~~ spudger to flip up the small, zero insertion force~~, retaining flap~~.
+	[* black] Use the spudger to flip up the small retaining flap on the zero insertion force connector.
	[* icon_caution] Make sure you are prying up on the retaining flap, not the connector itself.