Microsoft Surface 2 Front Facing and Rear Facing Camera Replacement 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: Ron Davis — 19 May 2016

Düzenleme onaylandı tarafından Ron Davis

-	[* black] Carefully peel the copper ~~foil away from the Surface 2 case that will hold~~ the rear facing camera in place.
-	[* black] Carefully pull the rear facing or front facing camera from its ZIF connector ~~port~~.
+	[* black] Carefully peel away the copper holding the rear-facing camera in place.
+	[* black] Carefully pull the rear-facing or front-facing camera from its ZIF connector.
	[* icon_note] No force is needed to plug in or remove the ribbon cable.