Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: Philip Le Riche

Düzenleme onaylandı tarafından Philip Le Riche

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove a white nylon retainer. This clips onto the min logic board below at two places.
-[* orange] Remove the black tape on the two ribbons running from the main logic board to the lens assembly securing them to their connectors.
-[* black] Gently lift the clamping bars on the connectors and ease out the ribbons.
+[* red] Remove a white nylon retainer. This clips onto the main logic board beneath it at two places.
+[* orange] Gently peel off the black tape on the two ribbons running to the main logic board from the lens assembly.
+[* orange] Gently lift the clamping bars on the connectors and ease out the ribbons, just as you did in step 3.