Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: McGregor Coyne

Düzenleme onaylandı tarafından McGregor Coyne

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Remove the 7 screws on the outside of the camera
+ [* red] Two 5 mm PH000 screws on the right side of the camera body
+ [* orange] Four 3mm PH000 screws on the bottom and the left side of the camera body.
+[* black] Use the plastic spundger to push the back casing out. Start from the right side and work your way clockwise around the case.
+[* icon_note] The HDMI / AV tab might fall out. this is supposed to happen as it is not screwed into place in the back casing.