Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Edward Pacheco

Düzenleme onaylandı tarafından Edward Pacheco

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove the two screws (3mm long) using a PH0 screwdriver that are holding the hard drive into the mounting bracket.
-[* black] Pull up on the black Mylar sheet and remove it from the existing hard drive, it has some adhesive, but will simply pull off with just a small amount of force.
+[* red] Remove the two screws (3mm long) using a PH0 screwdriver that are holding the hard drive into the mounting bracket.
+[* orange] Pull up on the black Mylar sheet and remove it from the existing hard drive, it has some adhesive, but will simply pull off with just a small amount of force.