2. Adımdaki Değişiklikler
Düzenleyen: Mike Glenn —
Düzenleme onaylandı tarafından Mike Glenn
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Locate the opaque strip, or "ribbon," connecting the back of the keyboard to the hardware of the netbook. |
|---|---|
| - | [* red] To disconnect the ribbon, use one of the small blue spudgers to pull each side of the black plastic strip, located below the ribbon, away from the ribbon. |
| - | [* black] The black strip will disconnect completely from the ribbon. You can remove the keyboard with the ribbon attached to the back. |
| + | [* black] Flip the keyboard over by pulling the top edge of the keyboard away from the netbook body, using the bottom edge as a hinge point. |
| + | [* black] Locate the opaque strip, or ribbon cable, connecting the back of the keyboard to the hardware of the netbook. |
| + | [* red] To disconnect the ribbon cable, use a plastic opening tool to pull each side of the black plastic strip, located below the ribbon cable, away from the ribbon cable. |
| + | [* black] The black strip will disconnect completely from the ribbon cable. The keyboard will then be detached from the netbook's body and can be safely removed. |