1. Adımdaki Değişiklikler
Düzenleyen: Edward Pacheco —
Düzenleme onaylandı tarafından Edward Pacheco
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] remove the three 4mm screws holding the palm rest cover. | |
| [* blue] Carefully disconnect all of the connectors with the blue tabs | |
| - | [* black] 1 routing guide 2 antenna cables (2) 4 Turn the computer over and open the display as far as possible. 5 Remove the antenna cables from the slot on the computer base. 6 Peel off the tape that secures the display cable to the system board 7 Lift the connector latch and disconnect the display cable from the system board. |
| [* black] 1 display cable 2 tape 3 connector latch 8 Remove the screws that secure the display hinges to the computer base. 9 Note the antenna cable routing and remove the cable from the routing guides on the computer base. 78 10 Release the display hinges from the tabs on the computer base and lift the display assembly off the computer base |