Eşyalarını Tamir Et Topluluk Mağaza

8. Adımdaki Değişiklikler

Düzenleyen: Kseniya Korneva —

Düzenleme onaylandı tarafından Kseniya Korneva

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] For this step, orient the netbook with the screen folded down and the netbook flat on the ground with the back facing up. The battery compartment should be facing you.
[* red] Locate the two screws in the holes on either side of the battery compartment
[* icon_note] This next step is challenging and requires the use of both hands or the help of another person.
-[* orange] Opening up the computer screen, find the gold screw housing to the inside of each hinge point. These are next to the screws you removed in the previous step.
+[* orange] Opening up the computer screen, find the 3mm gold screw housing to the inside of each hinge point. These are next to the screws you removed in the previous step.
[* black] In this next step, you will remove the screw from the bottom while holding the gold screw housing in place.
[* black] Position the netbook on its side. The side that is on the ground should not be the side that has the screw you are trying to remove.
-[* black] Hold the gold screw housing in place using the tweezers. Simultaneously remove the screw from the back panel, using the PH00 philips screwdriver head.
-[* icon_note] This step is easiest if your dominant hand is doing the unscrewing and your other hand holds the tweezers.
+[* black] Hold the gold screw housing in place using the black tweezers. Simultaneously remove the screw from the back panel, using the PH00 (+) Philips screwdriver head.
+[* icon_note] The screen will still be connected to the motherboard so do not try to pull it apart.