2005-2007 Ford Focus Brake Shoes Replacement 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: David Hodson — 20 Haz 2012

	[* icon_note] This step is for removing the brake drum and the wheel bearing together.
-	[* black] Use a ~~hammer~~ and a flat head screwdriver to make a small indentation along the edge of the wheel bearing dust cap.
+	[* black] Use a mallet and a flat head screwdriver to make a small indentation along the edge of the wheel bearing dust cap.
	[* black] Pry the dust cap out of the brake drum with the flat head screwdriver.
	[* red] Remove the 29 mm rear hub bolt nut from the brake drum. This will require either a breaker bar or an impact wrench.
	[* icon_note] This nut is torqued to 175 ft-lbs, and should not be removed more than four times. Use a permanent marker to make a mark on the nut each time it is removed.