2. Adımdaki Değişiklikler
Adım Satırları
| + | [title] Separating the front and rear halves |
|---|---|
| + | [* black] Refer to section ''8.3.1 Removal of the Rear Case Unit'' of the Service Manual. |
| + | [* black] To replace the rear wheel switch, you'll have to split the camera into its front and rear halves. Before you remove any screws, remove the battery and storage card. |
| + | [* black] Use a small, flat screwdriver to pry out and remove the hot shoe spring. This allows access to screws beneath the hot shoe. |
| + | [* black] Remove the two ***black ***screws as indicated. Leave the silver screws in place. |
| + | [* black] Remove the following screws around the body of the camera: 2 bottom screws (on rear half), 2 right-side screws, 1 screw on left-hand side. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi