Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Netmammal —

Düzenleme onaylandı tarafından Netmammal

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Thermal breaker reset and why you need it
[* black] Notice hole with red arrow pointing to it. This is the reset for what is probably a thermal breaker. According to ChiliTech support, you stick a (very long) pencil down here to reset the breaker, do this if the heater on your cube does not work. (or works poorly.)
[* black] Resetting the thermal breaker might take several tries, its hard to tell if you did it right. It seems to be a mechanical thing, and not a microswitch like you might use to reset your router.
-[* black] You need that heater, because ChiliTech has changed the instructions for the cube since 2014. They now want you to empty the cube, refill with hydrogen peroxide, and run it on high for 5-6 hours. And they want you to do this every month? Better buy stock in peroxide and distilled water companies!
+[* black] You need that heater, because ChiliTech has changed the instructions for the cube since 2014. Now you need to be able to turn the heat up to high (even if you only use your cube for cooling.)
+[* black] Every month, they recommend 1/4 cup of hydrogen peroxide and run it at 90º for 20 minutes.
+[* black] Every 3rd month they want you to put 1/4 cup of hydrogen peroxide in, and run the cube on high for 6-8 hours.
+[* black] Better invest in stock in peroxide and distilled water companies!
[* black] This is all to cook the bacteria that grows in these things. Don't tell your spouse if they are squeamish about that sorta stuff, just tell 'em you are experimenting with a new way to brew beer.