| | [* orange] Use a spudger or your fingernail to flip up the four, small retaining flap, or zero insertion force (ZIF) connectors. Then, pull the ribbon cable out to disconnect it. |
|---|
| | [* yellow] Remove the green tape using your fingernail. Then, use a spudger to pry the one antenna cable connector straight up from the board. |
|---|
| | [* green] Use tweezers or a spudger to pry up each side of the flat-topped connector. Then, lift the one connector straight up from its socket. |
|---|
| | [* violet] Use tweezers or your fingers to pull the two double-bundled cables up and away from the connector in the same direction that the individual wires are running. |
|---|